Technical Data Sheet
Standard and Dry-Peel VOID Materials
Behaviour, substrate suitability and selection guidance for the two VOID constructions.
Available on request
Tamper-Evident Release Films
Dry-Peel VOID Tamper-Evident Film and Labels
Non-stick VOID evidence designed for corrugated and uncoated paper surfaces where conventional residue transfer may not be suitable.
At a glance
- Tamper response
- Non-stick surface displaying VOID message
- Reapplication
- Not possible after removal
- Residue
- Dry — no tacky transfer
- Corrugated board
- Suitable
- Uncoated paper
- Suitable
Overview
Corrugated board and uncoated paper are porous and fibrous. A residue-transfer VOID construction does not always release cleanly from them, which can leave evidence that is hard to read — or fibre tear that is hard to interpret.
Dry-peel VOID solves that differently. On removal it leaves a non-stick surface displaying a VOID message, and it cannot be reapplied afterwards. The evidence is clear, dry and unambiguous on exactly the surfaces where the standard construction struggles.
It is used for general wholesale packaging and supply-chain protection, where cartons move through multiple handling points and the box itself needs to show whether it has been opened.
Performance benefits
Built for porous surfaces
Designed for corrugated board and uncoated paper, where residue-transfer constructions may not behave predictably.
Clean, dry evidence
Leaves a non-stick surface displaying a VOID message rather than a tacky residue.
Cannot be reapplied
Once removed, the label cannot be put back, so the evidence cannot be concealed by re-sealing.
Suited to wholesale distribution
Practical for cartons moving through multiple handling points in general wholesale packaging and supply-chain protection.
Available configurations
- Format
- Film
- Label material
- Suitable substrates
- Corrugated board
- Uncoated paper
- Customisation
- Custom VOID message
- Custom printing
Applications
- General wholesale packaging
- Corrugated carton closure seals
- Supply-chain protection
- Distribution and warehouse security seals
How it works
01
Applied to the carton
The label or film is applied to corrugated board or uncoated paper.
02
Removal attempted
Someone attempts to lift the seal to open the carton.
03
VOID message appears
The construction separates and a VOID message is displayed on a non-stick surface.
04
Cannot be reapplied
The removed label will not re-adhere, so the evidence cannot be hidden by resealing.
The material in application
Production and application photography of this construction. Nothing here is a mock-up.
The message shows on a dry, non-stick surface.
Technical specifications
Final suitability should be confirmed through technical discussion and application testing.
| Property | Value | Status |
|---|---|---|
| Tamper response | Non-stick surface displaying VOID message | Standard |
| Reapplication | Not possible after removal | Standard |
| Residue | Dry — no tacky transfer | Standard |
| Property | Value | Status |
|---|---|---|
| Corrugated board | Suitable | Standard |
| Uncoated paper | Suitable | Standard |
| Coated board, glass, plastic, metal | Use standard VOID instead | Standard |
| Property | Value | Status |
|---|---|---|
| Width and length | Confirmed against your converting equipment | On enquiry |
| Custom VOID message | Available | Custom |
| Printing | Up to eight-colour gravure | Standard |
How to read these values
- Standard
- Supplied as standard for this product.
- Available
- Available as an option on applicable constructions.
- Custom
- Made to your specification.
- On enquiry
- Confirmed against your application rather than published as a universal figure.
Documents and downloads
Frequently asked
Anything not covered here, ask the team directly — application questions are usually faster to answer than to document.
Ask a technical questionHow is dry-peel different from standard VOID?
Standard VOID leaves a tacky residue on the substrate. Dry-peel leaves a non-stick surface displaying a VOID message and no adhesive residue. The difference matters on porous surfaces: dry-peel is designed for corrugated and uncoated paper, where residue transfer may not behave predictably.
Can the label be put back after removal?
No. Once removed it cannot be reapplied, so the evidence cannot be concealed by resealing the carton.
Can we print our own message on it?
Yes. Custom VOID messaging and custom printing are available. Share your artwork and the carton specification with your enquiry.
Related solutions
Tamper-Evident Release Films
Standard VOID Film and Labels
Permanent-transfer tamper evidence that leaves a visible VOID residue when removal is attempted.
View solutionTamper-Evident Release Films
Security Bag Film
Integrate visible tamper evidence into your bag construction without compromising production efficiency.
View solutionCustom Development
Custom and OEM Development
Define the substrate, release level, dimensions, security response and finished format around your application.
View solution
Discuss Dry-Peel VOID Film and Labels for your application
Send your substrate, dimensions, operating conditions and estimated volume. The enquiry form arrives pre-filled with this product so you only need to describe the application.