Solutions

Two ranges of release film, built for real production requirements

Silicone-coated release films engineered for consistent converting, and tamper-evident release films that make package interference visible. Every construction is confirmed against the substrate, the line and the conditions it has to work in.

Walk the rangeEleven constructions, one at a time — spool, MET, PET, HDPE, paper and the tamper-evident films.
Filter by specificationNarrow by base material, coating side and tamper behaviour to reach the right construction.
Start from your industryBegin at the sector constraint — release consistency, visible evidence or substrate behaviour.
Discuss a custom solutionNo catalogue equivalent? Constructions are developed around the line and substrate you run.

The range

Eleven constructions, one at a time

Scroll through the range in the order the specification conversation usually takes — release films first, then the security films that run on them.

0111

SPOOLSilicone-Coated Release Films

Three rolls of running length. One mount.

Extended-length silicone-coated film wound to 24,000 m, so the line stops for a roll change a third as often.

Per spool: 24,000 mPer spool
Fewer changeovers: 66%Fewer changeovers
Conventional length: 3×Conventional length

Spool-Wound Release Film

METSilicone-Coated Release Films

A metallised release face you can see on the line

Silicone-coated metallised polyester, coated in house so release level is developed against your adhesive rather than accepted as supplied.

Thickness: 12–23 µThickness
Slit width: 19–55 mmSlit width
Standard roll: 8,000 mStandard roll

MET Metallised Release Film

PETSilicone-Coated Release Films

Release developed against your adhesive, not ours

Solvent-based silicone coated in house on polyester and polypropylene, in C1S, C2S and differential-release constructions.

Thickness: 12–50 µThickness
Max width: 720 mmMax width
Coating sides: C1S / C2SCoating sides

PET Polyester Release Film

HDPESilicone-Coated Release Films

The liner when polyester is more film than you need

Milky and natural high-density polyethylene at 40 micron, slit to 19 mm for tape and bag lines.

Standard gauge: 40 µStandard gauge
Standard width: 19 mmStandard width
Outer diameter: 12–14 inOuter diameter

HDPE Release Film

PAPERSilicone-Coated Release Films

Lies flat, dies clean, strips without stretch

Silicone-coated release paper from 67 gsm upward, for label stock and die-cut components.

Substance: 67 gsm+Substance
Roll length: 2,400–3,000 mRoll length
Core: 3 inCore

Paper Release Liner

LEVEL 3Tamper-Evident Release Films

The moment a bag is opened stops being invisible

Permanent VOID transfer in red or blue, printed with your message, on 100% recyclable LDPE.

Standard widths: 27–45 mmStandard widths
Gravure printing: 8-colourGravure printing
Recyclable LDPE: 100%Recyclable LDPE

Security Bag Film

COURIERTamper-Evident Release Films

The parcel arrives able to testify

The security closure for poly mailers and courier envelopes, printed to the brand it protects.

Standard widths: 27–45 mmStandard widths
Standard colours: Red / blueStandard colours
Message and artwork: CustomMessage and artwork

Poly Mailer and Courier Film

LEVEL 4Tamper-Evident Release Films

White to pink, the moment someone reaches for a heat gun

A thermochromic indicator that records heat-assisted attempts, on top of everything Level 3 already does.

Heat indicator: White → pinkHeat indicator
Does not reset: PermanentDoes not reset
In-house manufacture: 100%In-house manufacture

Level 4 Heat-Sensitive Film

VOIDTamper-Evident Release Films

The residue stays on the package

Permanent VOID transfer for coated board, glass, plastic and metal, converted as film or label stock.

Residue transfer: PermanentResidue transfer
Suitable substrates: 4Suitable substrates
VOID message: CustomVOID message

Standard VOID Film and Labels

DRY-PEELTamper-Evident Release Films

Clean evidence on the surfaces residue cannot read

A non-stick VOID message for corrugated and uncoated paper, and no way to put the label back.

No tacky residue: DryNo tacky residue
Designed substrate: CorrugatedDesigned substrate
After removal: Non-reusableAfter removal

Dry-Peel VOID Film and Labels

CUSTOMCustom Development

Built around your line, not around our catalogue

Substrate, release level, security response, printing and finished format defined per application, sampled before supply.

Coating to winding: In houseCoating to winding
Before production: SampledBefore production
Supply available: OEMSupply available

Custom and OEM Development

Filter the full catalogue

Narrow the range by what you already know. Final suitability should be confirmed through technical discussion and application testing.

Product family

Base material

Coating side

Tamper behaviour

Industry

Customisation

Showing 11 of 11 solutions

Silicone-Coated Release Films
Spool-Wound Release Film
Three times the running length of a conventional 8,000 m roll, with up to 66% fewer changeovers.
- 24,000 m
- 3× running length
- Spool and pancake winding
View solution
Silicone-Coated Release Films
MET Metallised Release Film
Metallised polyester with a uniform silicone release face, slit to width and wound to 8,000 m.
- Metallised PET
- 12 / 19 / 23 micron
- 8,000 m rolls
View solution
Silicone release coating
Polyester or polypropylene base film
Silicone-Coated Release Films
PET Polyester Release Film
Consistent release and dimensional stability across labels, tapes and peel-and-stick constructions.
- PET and PP
- C1S and C2S
- 12–50 micron
View solution
Release face
HDPE film — milky or natural
Silicone-Coated Release Films
HDPE Release Film
Milky or natural high-density polyethylene film for cost-controlled release and interleaving applications.
- Milky / natural
- 40 micron
- 19 mm standard
View solution
Silicone release coating
Release paper — 67 gsm and above
Silicone-Coated Release Films
Paper Release Liner
Silicone-coated paper from 67 gsm upward for label stock, die-cutting and lay-flat converting.
- 67 gsm and above
- 2,400 – 3,000 m
- 3 inch core
View solution
Tamper-Evident Release Films
Security Bag Film
Integrate visible tamper evidence into your bag construction without compromising production efficiency.
- Level 3
- 27 – 45 mm
- Custom VOID message
View solution
Tamper-Evident Release Films
Poly Mailer and Courier Film
Visible interference evidence for e-commerce and courier packaging, with custom messaging and colours.
- E-commerce
- Custom messaging
- Converter support
View solution
Tamper-Evident Release Films
Level 4 Heat-Sensitive Film
Everything Level 3 does, plus a heat indicator that turns from white to pink when the seal is warmed.
- White to pink
- 100% in-house
- Level 3 features included
View solution
Tamper-Evident Release Films
Standard VOID Film and Labels
Permanent-transfer tamper evidence that leaves a visible VOID residue when removal is attempted.
- Residue transfer
- Coated board, glass, plastic, metal
- Pharma
View solution
Tamper-Evident Release Films
Dry-Peel VOID Film and Labels
Non-stick VOID evidence for corrugated and uncoated paper, where residue transfer is unsuitable.
- Corrugated
- Uncoated paper
- Non-reapplicable
View solution
Custom Development
Custom and OEM Development
Define the substrate, release level, dimensions, security response and finished format around your application.
- OEM
- Sample development
- Application testing
View solution

Not sure which construction applies?

Describe the substrate, the process and the requirement. The team will identify the closest existing construction or tell you what would need to be developed.

Request a Quote Request a Sample WhatsApp technical sales